What we can do is wire the two 12v panels in series plus to minus and then we can wire it in parallel with the 24v panel.
Different voltage solar panels in series.
Most string inverters have an operational voltage window between 300 and 500 volts.
Lets say the load is a 24v water pump.
For maximum voltages under 30 v it s actually not hard to make your own buck converter.
Here in italy the best selling panel is the 230wp 32v panel that is composed of 60 polycrystalline solar cells wired in series.
That is the positive of one to the negative of the other.
Another option is to take multiple solar panels and wire them together to equal the same output as the other mismatched panel.
There are some major benefits to connecting solar panels in series.
Voltage amps of solar panels wired in series starting at the top.
Any more than that would exceed the maximum voltage the inverter could handle.
If you connect 2 solar panels of different voltage in series or in parallel 1st let consider 2 in series.
This gives us 57 18 volts and 9 18 amps.
Since these panels are wired in series we need to add the voltages of the combined panels and leave the amps alone.
In most crystalline solar panels the open circuit voltage is around 40 volts.
We ve got 3 175w panels with stats of 19 05v and 9 18a.
For instance in the demo below we have a 100w 24v panel and some 50w 12v panels.
When installing solar panels in series the voltage adds up but the current stays the same for all of the elements.
This would mean that when designing a system you could have between 8 and 12 panels in a series.
For example if you installed 5 solar panels in series with each solar panel rated at 12 volts and 5 amps you d still have 5 amps but a full 60 volts.
So a 12v and 24 volt panel hooked in series will produce about 36v when connected to a load.
If the two panels have similar current ratings but different voltage rating you can put them in series to get the sum of the voltages at the single current rating.
Then you get the sum of the two.